March 22, 2022

Torque and Inspection

The bolts that hold the wire bundle clamps must be tightened to a specific torque to prevent loosening of the bolt or damage to the components. By the end of this course, you will be able to • Identify the proper torque for a bolt from the information in the installation plan • List items to inspect upon completion of a wire bundle installation
March 22, 2022

Fay and Prepack Sealing

Fay and prepack sealing is one of the methods for applying sealant. By the end of this course, you will be able to • Define fay sealing • Identify where fay seals are used • Understand the process of fay sealing • Define prepack sealing • Identify where prepack seals are used • Understand the process of prepack sealing
March 22, 2022

Clamping Wire Bundles – Part Two

Course Description Properly clamping wire bundles in an airplane requires a thorough understanding of the requirements on a production illustration and installation plan. By the end of this course, you will be able to • Identify hardware requirements on a production illustration • Identify types of clamps required on a production illustration • Position clamps properly at attach points on a project • Understand the allowable distance between ties in areas of the airplane
March 22, 2022

Fillet and Injection Sealing

Fillet and injection sealing is one of the methods for applying sealant. By the end of this course, you will be able to • Define fillet sealing • Identify where fillet seals are used • Understand depth of fillet • Understand the process of fillet sealing • Define injection sealing • Identify where injection seals are used • Understand the process of injection sealing
March 22, 2022

Cap Sealing

Cap sealing is one of the methods for applying sealant. By the end of this course, you will be able to • Define cap sealing • Identify where cap seals are used • Understand the process of cap sealing
March 22, 2022

Electrical Bond and Ground Introduction

Ground studs enable the aircraft airframe to become used as a part of the overall electrical circuit. Installing grounds studs properly is critical to the overall safety and operation of the aircraft. By the end of this course, you will be able to • List the steps required to install a pre-installed ground stud • List the steps required to install a direct standard ground stud • Explain how to use the power tools to install ground studs
March 22, 2022

Pre-installed Ground Studs

Bonding and grounding ensures that all electrical energy within the airplane flows per engineering specifications. Proper surface preparation and installation are required to meet the allowed resistance measurement between the bond and the structure. By the end of this course, you will be able to • Install a pre-installed ground stud • Check resistance on a pre-installed ground stud
March 22, 2022

Electrical Fay Surface Bonds

Surface bonding is assembling airplane components in a metal-to-metal contact manner. Proper surface preparation and installation are required to meet the allowed resistance measurement between the bond and the structure. By the end of this course, you will be able to • Prepare the surfaces of a fay surface bond • Install a ground stud in two pieces of material • Check resistance on a ground stud
March 22, 2022

Direct Ground Stud

Bonding and grounding ensures that all electrical energy within the airplane flows per engineering specifications. Proper surface preparation and installation are required to meet the allowed resistance measurement between the bond and the structure. In this course, you will learn how to install and test resistance on a direct ground stud. By the end of this course, you will be able to • Install a direct ground stud • Check resistance on a direct ground stud